-
129,00 € zzgl. Versandkosten
Komplettes Set um den Ringsensor zu ersetzen für Motor Typ 1 + 4. Bestehend aus:
Set to replace the ring sensor used with VDO gauge for typ 1 and 4 motor
- plug connector with inegrated thermo sensor
- fit to VDO instrument Celsius and Fahrenheit (300C / 600F)
- coupling to use the same cable as before
- pin for plug (SAE)
- manual english
ATTENTION: only with old VDO gauges 50-300°C or 100-600°F. If you send us your gauge we will check function.
-
2,50 € zzgl. Versandkosten
Price per meter
-
280,00 € zzgl. Versandkosten
- plug connector with temperature sensor
- 4m cable with connector
- diameter 52 mm
- range 100-300° C
- analog, mechanical clockwork
- housing metal with clip
- for 6 + 12 V
- illumination 2W 12V standard plug
-
169,00 € zzgl. Versandkosten
- ring optics black or chrome
- diameter 52 mm
- range 100-300° C
- analog, mechanical clockwork
- housing metal with holder
- for 6 + 12 V
- illumination 2W 12V standard plug
- without sensor and cable
- can be used for VDO ringsensor
-
280,00 € zzgl. Versandkosten
system to be installed in the passengers cabin for type 1 and type 4 motors voltage 6 or 12 Volt (choose) controller with small digital display 48 x 24 mm Celsius or Fahrenheit temperature alarm individual adjusted factory adjustment 250°C Temperature Alarm by flashing oil pressure lamp and LED iin the display oil pressure alarm…
-
280,00 € zzgl. Versandkosten
System to be placed in the motor compartment
- for type 1 and type 4 motors
- voltage 6V oder 12V (choose)
- temperature alarm by flashing oil pressure lamp
- alarm can be adjusted individual (standard 250° C)
- oil pressure alaram same function as before
- ready wired for installation
- electric connection by only 3 wires
- Plus / Minus / oil pressure switch
- no change of the electric
- no need to put additional cables in
scope of delivery
- plug connector with integrated sensor
- aluminium “blackbox” ready for installation
- english instruction manua
-
169,00 € zzgl. Versandkosten
- ring optics black or chrome
- diameter 52 mm
- range 100-300° C
- analog, mechanical clockwork
- housing metal with holder
- for 6 + 12 V
- illumination 2W 12V standard plug
- without sensor and cable
- can be used for VDO ringsensor
